AtlasCalcsUtility Calculation Suite
2026-09-23 8 min read

Brick Cost Calculator

Free brick cost calculator — calculate brick wall brick counts with joints, openings, mortar, weight and cost. Includes live results, step-by-step working, charts, material takeoff and cost estimates. No sign-up.

Calculator

Wall length(ft)
ft
Wall height(ft)
ft
Waste allowance(%) Help
%

Cuts and breakage

Price (optional)($/1000) Help
$/1000

Brick price per thousand

Mortar bag price($/bag) Help
$/bag

80 lb bag, blank to skip

Brick size

Masonry plan

ItemAmount
BricksNet + waste — order this2,348
Mortar65.8 cu ft (80 lb bags)74 bags
WeightDelivery planning4.93 tons

How to use this result

  • Primary result: 2,348.00 bricks — verify it against a rough hand check before ordering.
  • Read the steps section to see every conversion and the exact formula path.
  • Use the breakdown table on the left as your order or bid checklist.
  • Re-run with worst-case dimensions so the plan covers the whole job.

Results

Optimal

Bricks to order

2,348bricks

Net + waste, rounded up

Mortar (80 lb bags)

74bags

65.8 cu ft of mortar

Brick weight

4.93tons

9,862 lb total

Material cost

$2,000.80

Bricks + mortar at your prices

Live results update as you type — currently showing 2,348.00 bricks. Replace the defaults with your own measurements for exact results.

Visualizations

Bricks vs mortar bags

2,348Bricks
740Mortar bags × 10

Net bricks vs waste

Net bricks93%
Waste7%

Formula

Brick count is net wall area times bricks-per-square-foot with joints, plus waste, rounded up.

bricks = net-area × 144 ÷ ((L+j)(H+j))

Variables

SymbolNameUnitDescription
netNet areasq ftGross minus openings.
perFtBricks/sq ftcount144 ÷ jointed face area.
orderOrderbricksNet × (1+w), rounded up.

Explanation

Openings deduct first, jointed coursing gives per-foot density, waste multiplies, and mortar (0.03 cu ft/brick) plus weight follow.

Step-by-Step Calculation

Follow each step to understand how the result is calculated from your inputs.

Step 1

Net wall area after openings.

40 × 8 − 0.00
Result: Net = 320.00 sq ft
Step 2

Bricks per sq ft with 3/8 in joints.

144 ÷ (8.000 × 2.625)
Result: 6.86 bricks/sq ft → 2,194 bricks
Step 3

Add 7% waste and round up.

2,194 × 1.07
Result: 2348 bricks to order
Final Answer
2,348

Worked Examples

See how the calculator works with different scenarios.

Scenario

The calculation run on the values above, showing the full path rather than only the answer.

Inputs

Result:2,348.00 bricks

Calculation

1. Net wall area after openings. → Net = 320.00 sq ft 2. Bricks per sq ft with 3/8 in joints. → 6.86 bricks/sq ft → 2,194 bricks 3. Add 7% waste and round up. → 2348 bricks to order

Result

2,348.00 bricks

Interpretation

Verify coursing against openings, add 5–10% waste, and schedule delivery after the footing passes inspection.

Understanding Your Result

Your Result: Bricks to order: 2,348 bricks

Typical range: Modular brick ~7 per sq ft · 8 in block ~1.125 per sq ft · mortar joint 3/8 in · grout cores as specified.

What This Means

Your result is 2,348.00 bricks — the unit count, mortar, grout and cost for your brick wall

Why It Matters

Masonry arrives by the thousand and the pallet — short orders stall masons, long orders strand money on site. Coursing math first keeps the crew laying.

Professional Interpretation

Verify coursing against openings, add 5–10% waste, and schedule delivery after the footing passes inspection.

How this is calculated

Bricks = net area × 144 ÷ jointed face area, plus waste, rounded up. Waste multiplies last; costs price the order quantities.

What drives the result

The inputs in a single consistent unit and the allowance or price you apply.

Recommendations

  • •Verify critical dimensions on site before ordering.
  • •Keep one unit throughout each calculation.
  • •Add the trade allowance before buying, not after.
  • •Attach the step-by-step working to bids and records.

Educational Content

Introduction

Masonry quantity is wall area divided by the unit face area with joints, minus openings, plus waste. Mortar and grout follow from the unit count.

Concept Explanation

Bricks = net area × 144 ÷ jointed face area, plus waste, rounded up. Waste multiplies last; costs price the order quantities.

Applications

▸Brick and block wall takeoffs
▸Veneer, paver and cap quantities
▸Mortar and grout bag counts
▸Stone tonnage and mortar estimates
▸Masonry cost estimates with waste

Benefits

  • •Coursing math with joints built in
  • •Openings deducted before ordering
  • •Mortar, grout and cost from the same inputs
  • •Free, no sign-up, works on site from a phone

Limitations

  • •Two-dimensional math unless stated otherwise — slopes and curves need the right tool
  • •Results are only as good as the site measurements
  • •Allowances and prices are estimates — confirm with local quotes

Best Practices

  • •Measure twice and write measurements down before typing them in
  • •Keep one unit throughout each calculation
  • •Photograph the tape on large or disputed measurements
  • •Re-run with worst-case numbers so the plan covers the whole job

Common Misconceptions

Myth: The calculator replaces site verification.
Truth: It replaces the arithmetic, not the tape measure — always verify before ordering.
Myth: One decimal place is always enough.
Truth: On long runs, rounding early compounds. Enter full measurements and let the tool round at the end.
Myth: Metric and imperial give different answers.
Truth: They are the same physical quantity in different units — conversion is exact.

Practical Tips

  • •Enter full measurements and let the tool round at the end.
  • •Use the steps section to double-check the formula path.
  • •Save or share the result link with the crew and the supplier.
  • •Re-run with worst-case dimensions for a safe order.

Common Mistakes

Rounding measurements before calculating.
Enter the full tape reading; rounding early compounds across a job.
Mixing units between fields.
Pick one unit in the dropdown so every conversion is consistent.
Forgetting to verify on site.
Plans differ from as-built work — confirm critical dimensions.
Ordering the bare result with no allowance.
Add the trade waste or contingency factor before buying.

Assumptions

This calculator makes the following assumptions to provide estimates:

Consistent units: All inputs share the selected unit system.
Standard geometry: Flat-plane Euclidean formulas unless stated.
Full precision: Rounding happens only on display, never mid-calculation.

Limitations

Be aware of these limitations when using this calculator:

Estimates, not quotes: Allowances and unit prices vary by region — get 2–3 local quotes.
Verify on site: Confirm critical dimensions before ordering or cutting.

Frequently Asked Questions

Answers to common questions about this calculator.

How many bricks per square foot?
About 7 modular bricks per sq ft of single-wythe wall with 3/8 in joints. Queen and king sizes run fewer per foot — the size dropdown adjusts.
How much mortar per 1000 bricks?
Roughly 30 cu ft (about 33 eighty-pound bags) for modular single-wythe work. Deeper joints and sloppy coursing eat more.
How much waste should I add?
5% on straight walls, 10% on walls with many openings, arches or curves. Cut units cannot be uncut.
How accurate is this calculator?
Exact for the dimensions and unit sizes entered. Verify coursing heights and opening sizes on the drawings before ordering.
What does the cost estimate include?
Units and mortar at your prices on the order quantities. Labor, grout, rebar and scaffolding add per the cost rows.
Do I need an engineer for a masonry wall?
Structural, retaining and tall walls need design per TMS 402. Garden and veneer walls still need stable footings and drainage.
How many bricks per square foot of wall?
About 7 modular bricks per sq ft of single-wythe wall with 3/8 in joints. Queen and king sizes run fewer — the size dropdown adjusts the count.
How many blocks per square foot?
About 1.125 eight-inch blocks per sq ft (9 per 8 sq ft) with 3/8 in joints. Openings deduct before counting.
How much mortar per 1,000 bricks?
Roughly 30 cu ft (about 33 eighty-pound bags) for modular single-wythe work. Deeper joints and sloppy coursing eat more.
What is the difference between CMU, block and cinder block?
CMU is the structural term for concrete masonry units; modern blocks use concrete aggregate while true cinder blocks used ash. Count them the same way; unit weights differ.
Do I fill block cores with grout?
Only cores with rebar and as the drawings require — typically reinforced cores at spacing, corners, openings and bond beams. The fill percentage sizes the grout.
What is a wythe and why does it matter?
One vertical layer of masonry one unit thick. Single-wythe counts in this tool; double-wythe doubles units and mortar — run the calculator twice or double the wall length.
How do I lay out coursing around openings?
Work from a story pole: full and half courses should land on lintel bearings and sill heights. Verify heights before ordering — cut courses at the top look wrong.
What is the difference between mortar and grout?
Mortar bonds units in joints; fluid grout fills cores around rebar. Different mixes, different jobs — never substitute one for the other.
How do I estimate pavers for curves and borders?
Area divided by jointed paver face plus 10% (15–20% for curves and diagonal patterns), then add border and soldier courses separately by linear foot.
How much base goes under pavers?
4–6 in of compacted road base plus 1 in of bedding sand, screeded — never use sand to make up grade. The base and sand rows size both in yards and tons.
Is brick veneer structural?
No — veneer is a non-structural skin tied to backup framing with weeps and flashing. Count units the same way, but detail ties, air space and drainage separately.
How do I control efflorescence on new masonry?
Keep units dry before laying, tool joints properly, flash and weep correctly, and let walls dry. Most white bloom washes off once water paths are fixed.
How do I measure correctly for the brick cost calculator?
Measure twice with a tape or laser, write every reading down before typing it in, and keep one unit throughout. Photos of the tape protect you on disputed dimensions.
What units does the brick cost calculator use?
Whatever unit you select — pick one and use it for every field so conversions stay consistent. Results convert to the common trade units automatically.
How accurate is the brick cost calculator?
Exact for the numbers entered: all math runs at full precision and rounds only for display. Field accuracy depends on your measurements, so verify critical dimensions on site.
Can I use the brick cost calculator for bids and quotes?
Yes — the steps section shows the full working, and the breakdown table lists order quantities. Attach both to bids so clients see net figures and allowances separately.
Should I add waste or contingency to the result?
Yes. Add the trade waste factor (5–20% depending on material) before ordering, and carry a separate 5–10% budget contingency for price movement and surprises.
Why is my result different from my supplier quote?
Quotes include delivery, minimums, pack-size rounding, tax and regional pricing on top of bare quantities. Compare the net quantities first, then the add-ons.
Do I need a professional for this work?
Measuring and budgeting you can do yourself with this tool. Structural design, permits, licensed trades and inspections still need qualified professionals.
How do I convert the result to other units?
Use the results dashboard conversions, or the dedicated conversion calculators for length, area, volume and weight. Convert each linear dimension before combining into areas or volumes.
What mistakes do beginners make with the brick cost calculator?
Rounding measurements too early, mixing units between fields, ordering the bare result with no allowance, and skipping site verification. The mistakes section on the page covers each one.
Can I share the brick cost calculator result with my crew or supplier?
Yes — use the Share result button to send the headline figure and link. The supplier can re-run your numbers from the same inputs.
Does the brick cost calculator work on a phone at the job site?
Yes — every page is mobile-friendly with no sign-up. Bookmark the tools you use daily for one-tap takeoffs.
How often should I re-run the brick cost calculator?
Re-run whenever dimensions change, prices move, or you switch materials. Early estimates, pre-order checks and final buy quantities each deserve a fresh run.

Related Calculators

Explore more calculators related to this topic.

Related Guides

Deepen your understanding with these educational resources.

Glossary

Technical terms used in mortgage calculations explained in plain language.

Wythe
One vertical layer of masonry one unit thick.
Course
One horizontal row of units.
Joint
Mortar bed between units, usually 3/8 in.
Grout
Fluid concrete poured into cores to bond and strengthen.
Rebar
Steel bars grouted into cores for structural walls.
Efflorescence
White salt deposits from water moving through masonry.
units
The primary unit reported by this calculator.

Authoritative References

Trusted sources and standards referenced by this calculator.

Applicable Standards

TMS 402/602: structural masonry design and construction rulesMortar joints typically 3/8 in unless drawings say otherwiseAdd 5–10% waste on units; more on arches, curves and patternsVerify coursing against openings before ordering units

Was This Calculator Helpful?

Page Information

Last Updated:

2026-09-23

Version:

2.0.0

License:

Free to use for educational and professional purposes.