AtlasCalcsUtility Calculation Suite
2026-09-23 8 min read

Fill Dirt Quantity Calculator

Free fill dirt quantity calculator — calculate fill dirt in yards, tons and bags from area and depth. Includes live results, step-by-step working, charts, material takeoff and cost estimates. No sign-up.

Calculator

Area length(ft)
ft
Area width(ft)
ft
Depth(in) Help
in

Placed thickness

Waste allowance(%) Help
%

Settlement and grade

Price (optional)($/cu yd) Help
$/cu yd

Blank to skip

Material plan

ItemAmount
MaterialWith waste — order this20.37 cu yd
TonsHauling unit24.44 tons
Or bags1.5 cu ft each367 bags

How to use this result

  • Primary result: 20.37 cu yd — verify it against a rough hand check before ordering.
  • Read the steps section to see every conversion and the exact formula path.
  • Use the breakdown table on the left as your order or bid checklist.
  • Re-run with worst-case dimensions so the plan covers the whole job.

Results

Optimal

Material needed

20.37cu yd

With waste

Tons

24.44tons

Hauling unit

Or bags (1.5 cu ft)

367bags

Small-job option

Haul loads

1.5loads

At 14 cu yd each

Live results update as you type — currently showing 20.37 cu yd. Replace the defaults with your own measurements for exact results.

Visualizations

Yards vs truck (cu yd)

20.4Your order
14Truck (14)

Net vs waste

Net91%
Waste9%

Formula

Coverage material is area times depth over 27, with tons, bags and loads from the same yards.

yards = L × W × D ÷ 27

Variables

SymbolNameUnitDescription
areaAreasq ftFootprint.
DDepthinPlaced thickness.
yardsYardscu ydWith waste.

Explanation

Area times depth at full precision divided by 27; density, bags and trucks follow.

Step-by-Step Calculation

Follow each step to understand how the result is calculated from your inputs.

Step 1

Coverage volume with waste.

50 × 20 × 0.50 ÷ 27 × 1.1
Result: 20.37 cu yd
Step 2

Convert at 2400 lb per yard.

20.37 × 2400 ÷ 2000
Result: 24.44 tons
Final Answer
20.37

Worked Examples

See how the calculator works with different scenarios.

Scenario

The calculation run on the values above, showing the full path rather than only the answer.

Inputs

Result:20.37 cu yd

Calculation

1. Coverage volume with waste. → 20.37 cu yd 2. Convert at 2400 lb per yard. → 24.44 tons

Result

20.37 cu yd

Interpretation

Probe every pad and trench, separate topsoil from spoil, and book trucks to the loose volume — not the bank figure.

Understanding Your Result

Your Result: Material needed: 20.37 cu yd

Typical range: Pickup ~2 cu yd · dump truck 10–16 loose cu yd · trench 1 ft × 100 ft × 4 ft ≈ 15 bank cu yd.

What This Means

Your result is 20.37 cu yd — the bank and loose volumes, truckloads and cost for your fill dirt

Why It Matters

Earthwork is the first money spent and the easiest to misjudge: swell multiplies spoil, haul distances multiply cost, and rock stops everything. Quantities first keeps the site moving.

Professional Interpretation

Probe every pad and trench, separate topsoil from spoil, and book trucks to the loose volume — not the bank figure.

How this is calculated

Yards = length × width × depth-in-feet ÷ 27. Soil factors apply last; trucks round up.

What drives the result

The inputs in a single consistent unit and the allowance or price you apply.

Recommendations

  • •Verify critical dimensions on site before ordering.
  • •Keep one unit throughout each calculation.
  • •Add the trade allowance before buying, not after.
  • •Attach the step-by-step working to bids and records.

Educational Content

Introduction

Earthwork quantity is geometry with soil factors: bank volume from dimensions, loose with swell, compacted with shrinkage, trucks from payload.

Concept Explanation

Yards = length × width × depth-in-feet ÷ 27. Soil factors apply last; trucks round up.

Applications

▸Pad, trench and basement takeoffs
▸Cut, fill and balance planning
▸Haul truck scheduling and spoil piles
▸Topsoil, base and bedding quantities
▸Grading and compaction estimates

Benefits

  • •Bank, loose and compacted figures together
  • •Swell and compaction factors built in
  • •Truckloads rounded up for scheduling
  • •Free, no sign-up, works on site from a phone

Limitations

  • •Two-dimensional math unless stated otherwise — slopes and curves need the right tool
  • •Results are only as good as the site measurements
  • •Allowances and prices are estimates — confirm with local quotes

Best Practices

  • •Measure twice and write measurements down before typing them in
  • •Keep one unit throughout each calculation
  • •Photograph the tape on large or disputed measurements
  • •Re-run with worst-case numbers so the plan covers the whole job

Common Misconceptions

Myth: The calculator replaces site verification.
Truth: It replaces the arithmetic, not the tape measure — always verify before ordering.
Myth: One decimal place is always enough.
Truth: On long runs, rounding early compounds. Enter full measurements and let the tool round at the end.
Myth: Metric and imperial give different answers.
Truth: They are the same physical quantity in different units — conversion is exact.

Practical Tips

  • •Enter full measurements and let the tool round at the end.
  • •Use the steps section to double-check the formula path.
  • •Save or share the result link with the crew and the supplier.
  • •Re-run with worst-case dimensions for a safe order.

Common Mistakes

Rounding measurements before calculating.
Enter the full tape reading; rounding early compounds across a job.
Mixing units between fields.
Pick one unit in the dropdown so every conversion is consistent.
Forgetting to verify on site.
Plans differ from as-built work — confirm critical dimensions.
Ordering the bare result with no allowance.
Add the trade waste or contingency factor before buying.

Assumptions

This calculator makes the following assumptions to provide estimates:

Consistent units: All inputs share the selected unit system.
Standard geometry: Flat-plane Euclidean formulas unless stated.
Full precision: Rounding happens only on display, never mid-calculation.

Limitations

Be aware of these limitations when using this calculator:

Estimates, not quotes: Allowances and unit prices vary by region — get 2–3 local quotes.
Verify on site: Confirm critical dimensions before ordering or cutting.

Frequently Asked Questions

Answers to common questions about this calculator.

How much fill dirt do I need?
Area × depth-in-feet ÷ 27, plus ~10% for settlement and uneven grade. Four inches over 1,000 sq ft is about 12.3 yards.
How deep should fill dirt go?
Topsoil 4–6 in for lawns and beds; structural fill in compacted lifts per the drawings. Depth multiplies everything.
Bank vs loose yards — what is the difference?
Bank yards are in-place; loose yards are after digging, swollen 20–35%. Trucks and spoil piles are loose; pay quantities are usually bank.
How accurate is this calculator?
Exact for the dimensions entered. Probe depths and check soil type — subgrade variation and rock move real quantities.
What does the cost estimate include?
Dig, haul or fill at your unit rates on the computed quantities. Rock, dewatering, shoring and testing price separately.
When do I need shoring or sloping?
OSHA requires protection at 5 ft depth and deeper (4 ft in some states). Plan the system before the excavator arrives.
How do I calculate excavation volume?
Length times width times depth in feet divided by 27 for bank yards, then add swell for loose haul yards. Probe depths — grade is never as flat as the plan.
How much swell should I allow?
25% for common earth, 30–35% for clay, up to 50%+ for blasted rock. Loose yards book the trucks; bank yards pay the contract.
How many dump truck loads is my dig?
Loose yards divided by truck capacity (10–16 typical), always rounded up. The loads row does it at your truck size.
What does digging cost per yard?
Roughly $20–$60 per bank yard for easy machine work, far more for rock, water, tight access or hand work. Enter local rates for a live total.
When do trenches need shoring or sloping?
OSHA requires protection at 5 ft depth and deeper (4 ft in some states): slope, bench, shore or shield. Plan the system before the excavator arrives.
How wide should a utility trench be?
Pipe diameter plus 16–24 in working room, wider with depth for sloping or shoring. Width multiplies every yard and every dollar.
What is bedding stone and how much goes under pipe?
4–6 in of compacted washed stone cradling the pipe, sized as length times width times depth over 27. Bedding carries the pipe forever.
Can I reuse spoil as backfill?
Clean granular spoil, yes — moisture-conditioned and compacted in lifts. Topsoil, organics and debris never go back against structures.
How do I compact backfill properly?
In 8–12 in lifts with a plate compactor or roller at the right moisture. Dumping full height and hoping settles for years.
What surprises hide underground?
Rock, water, old foundations, utilities and soft spots. Call locators, probe or test-pit first — dewatering and rock price far above dirt.
How do I keep excavation quantities honest?
Cross-section at intervals, track every truck ticket, reconcile bank vs loose, and re-measure after changes. Dirt grows when unmeasured.
What if my site conditions differ from the page defaults?
Defaults are worked examples, not recommendations — replace every input with your own measurements, prices and allowances before ordering or bidding.
How do I budget for price changes mid-project?
Lock supplier quotes in writing with expiry dates, carry a 5–10% escalation contingency, and re-run the calculator when prices move. Volatile materials get shorter quote windows.
Should I buy materials in bulk for this job?
Bulk wins when storage is dry and secure, the material keeps, and the discount beats carrying cost. Otherwise phased delivery avoids damage, theft and cash lockup.
How do I document quantities for change orders?
Record before-and-after measurements with dated photos, keep delivery tickets, and re-run the calculator for the changed scope. Paper trails get paid; memories do not.
What inspections relate to the fill dirt quantity calculator?
Anything structural, concealed or regulated gets inspected before covering: footings, steel, drains, waterproofing and rough-ins. Book inspections before the work that buries them.
How do I measure correctly for the fill dirt quantity calculator?
Measure twice with a tape or laser, write every reading down before typing it in, and keep one unit throughout. Photos of the tape protect you on disputed dimensions.
What units does the fill dirt quantity calculator use?
Whatever unit you select — pick one and use it for every field so conversions stay consistent. Results convert to the common trade units automatically.
How accurate is the fill dirt quantity calculator?
Exact for the numbers entered: all math runs at full precision and rounds only for display. Field accuracy depends on your measurements, so verify critical dimensions on site.
Can I use the fill dirt quantity calculator for bids and quotes?
Yes — the steps section shows the full working, and the breakdown table lists order quantities. Attach both to bids so clients see net figures and allowances separately.
Should I add waste or contingency to the result?
Yes. Add the trade waste factor (5–20% depending on material) before ordering, and carry a separate 5–10% budget contingency for price movement and surprises.
Why is my result different from my supplier quote?
Quotes include delivery, minimums, pack-size rounding, tax and regional pricing on top of bare quantities. Compare the net quantities first, then the add-ons.
Do I need a professional for this work?
Measuring and budgeting you can do yourself with this tool. Structural design, permits, licensed trades and inspections still need qualified professionals.
How do I convert the result to other units?
Use the results dashboard conversions, or the dedicated conversion calculators for length, area, volume and weight. Convert each linear dimension before combining into areas or volumes.

Related Calculators

Explore more calculators related to this topic.

Related Guides

Deepen your understanding with these educational resources.

Glossary

Technical terms used in mortgage calculations explained in plain language.

Bank cubic yard
One cubic yard of undisturbed in-place material.
Loose cubic yard
Excavated material after swell — typically 20–35% more than bank.
Swell
Volume growth when soil is dug (20–35% for most soils, up to 50%+ for rock).
Compaction
Mechanical densification of placed fill, usually in 8–12 in lifts.
Cut / fill
Ground removed (cut) or placed (fill) to reach design grade.
Spoil
Excavated material not reused as fill.
cu yd
The primary unit reported by this calculator.

Authoritative References

Trusted sources and standards referenced by this calculator.

Applicable Standards

OSHA: sloping, benching or shoring for trenches 5 ft and deeperSwell 20–35% for soils (bank → loose); compaction ~15% (loose → compacted)Haul trucks typically 10–16 cu yd loose per loadCall utility locators before any digging

Was This Calculator Helpful?

Page Information

Last Updated:

2026-09-23

Version:

2.0.0

License:

Free to use for educational and professional purposes.