2026-09-24 8 min read
Pool Evaporation Calculator
Pool evaporation gallons from surface area and daily loss — with refill cost.
Calculator
Quick presets
Surface area(sq ft) Help
sq ft
16x32 surface
Evap loss(in/day) Help
in/day
Pan or bucket test
Water rate ($/1,000 gal)($/unit) Help
$
Leave blank for engineering only
Diagram
Sketch for pool evaporation calculator with your values. Not to scale — verify on site before ordering.Plan
| Item | Value |
|---|---|
| Evap per dayHeadline evap per day | 79.78 gal |
| Cubic feetSupporting figure | 10.67 cu ft |
| ThousandsSupporting figure | 0.08 kgal |
| Priced value at $6/unitMaterials before labor + contingency | $0.48 |
Cost plan
| Materials | $0.48 |
| Labor and install | $0.00 |
| Contingency | $0.00 |
| Project total | $0.48 |
Estimates only — get 2–3 local quotes. Labor varies by region.
Comparisons
| Monthly refill? | 2,393.47 |
| Autofill setting? | 2.39 |
| Cost ($) | 0.48 |
Results
Normal
Evap per day
79.78gal
From gallons = area x inches x 0.623
Cubic feet
10.67cu ft
Supporting conversion
Thousands
0.08kgal
Supporting conversion
Estimated cost
$0.48
At $6/unit
Live results update as you type — currently showing 79.78 gal for pool evaporation calculator. Replace the defaults with your own values for an exact takeoff.
Visualizations
Your evap vs covers (gal/day)
79.8Your result
79.7Open (~80 gal/day)
15.9Covered (~16)
Project cost split
Materials100%
Labor0%
Contingency0%
Formula
Pool evaporation gallons from surface area and daily loss — with refill cost.
gallons = area x inches x 0.623
Alternative Form
monthly = daily x 30.44
Variables
| Symbol | Name | Unit | Description |
|---|---|---|---|
| V1 | Surface area | sq ft | 16x32 surface |
| V2 | Evap loss | in/day | Pan or bucket test |
| Q | Result | gal | Headline answer at full precision. |
Explanation
Inputs convert to consistent units first, the formula runs at full precision, then waste and rounding produce the order figure. Cost multiplies by your unit price.
Step-by-Step Calculation
Follow each step to understand how the result is calculated from your inputs.
Step 1
Gallons = area x inches x 0.623 (1 in over 1 sq ft = 0.623 gal).
gal = 512 x 0.25 x 0.623
Result: 80 gal
Step 2
Cubic feet and thousands of gallons for utility math.
cf = gal/7.48; kgal = gal/1000
Result: 11 cu ft = 0.080 kgal
Final Answer
79.78
Worked Examples
See how the calculator works with different scenarios.
Scenario
The live inputs above run through the full path below — not just the headline answer.
Inputs
Surface area:512 sq ft
Evap loss:0.25 in/day
Calculation
1. Gallons = area x inches x 0.623 (1 in over 1 sq ft = 0.623 gal). → 80 gal 2. Cubic feet and thousands of gallons for utility math. → 11 cu ft = 0.080 kgal
Result
79.78 gal
Interpretation
Order the uplifted figure, never the net: cuts, defects, rounding and code minimums consume the allowance.
Understanding Your Result
Your Result: Evap per day: 79.78 gal
Typical range: Open pools lose 1/4-1/2 in/day in heat · covers cut ~90%.
What This Means
Your result is 79.78 gal (evap per day). That is the engineered figure — verify it against the code table before buying.
Why It Matters
Sizing drives budget, schedule, deliveries and inspections. Small input errors compound across runs, so modelling before buying is the cheapest due diligence.
Professional Interpretation
Plan around 10.67 cu ft (cubic feet), about $0.48 at your unit price. Keep same-lot spares for repairs.
How this is calculated
gallons = area x inches x 0.623. Pool evaporation gallons from surface area and daily loss — with refill cost.
What drives the result
Input size, the selected option, waste % and whole-unit rounding. Unit price never changes quantity — only cost.
Recommendations
- •Split irregular scopes into measurable runs and add the sections.
- •Add waste before ordering: x1.10 straight, x1.15 cut-up, x1.20 complex.
- •Measure twice — lasers beat tapes past 20 ft; photograph nameplates.
- •Keep spares: lots, dye and grain shift between batches.
Educational Content
Introduction
Pool evaporation gallons from surface area and daily loss — with refill cost.
Concept Explanation
Every calculation reduces to gallons = area x inches x 0.623, evaluated at full precision after unit conversion. The Steps section shows each substitution so the path is auditable.
Applications
▸Leak-vs-evap bucket tests
▸Autofill settings
▸Cover justifications
▸Drought budgets
▸Salt dilution math
Benefits
- •One live calculation — no separate tools per size or material
- •Steps show every substitution for bid backup
- •Waste and rounding separated from net math
- •Instant cost, charts and lists from the same numbers
Limitations
- •Planning math only — it does not replace stamped design where required
- •Allowances use national planning rates; confirm local stock and prices
- •Irregular geometry should be split into measurable sections
Best Practices
- •Confirm nameplate and table values before ordering
- •Keep one unit per field; watch the steps for conversions
- •Photograph measurements and labels for dispute-proof records
- •Add the trade waste factor before ordering, not after
Common Misconceptions
Myth: Order exactly the computed figure.
Truth: Cuts, defects, fittings and rounding consume 10-20%. Ordering net guarantees a second trip.
Myth: Sticker price picks the cheapest option.
Truth: True cost is installed cost per net unit after waste, labor and contingency — compare that line.
Myth: One rule fits every job.
Truth: Straight runs, retrofits and complex layouts need different allowances — use the sensitivity example.
Practical Tips
- •Run one calculation per run, room or phase, then add the order lines.
- •Pick stock sizes that divide your runs evenly to cut waste several points.
- •Photograph each measurement next to the tape for bid backup.
- •Enter your actual unit price to turn the takeoff into a budget in one step.
Common Mistakes
Ordering the net figure with no waste.
Use the order line: net x (1 + waste%) rounded up to whole units.
Mixing units in one run.
Keep one unit per field; the steps show every conversion explicitly.
Forgetting fittings, slack and extras.
Add equivalents and slack first, then apply waste — in that order.
Ignoring lot/batch differences on the second trip.
Order spares from the same lot up front.
Skipping the verification step.
Recompute one line by hand using the FAQ method before paying.
Assumptions
This calculator makes the following assumptions to provide estimates:
Consistent units: Each field uses its stated unit; conversions run before the formula.
Standard conditions: Water at ~60 F; copper electrical at 75 C terminations unless noted.
Code minimums: Results at or above model-code minimums; local amendments may require more.
Limitations
Be aware of these limitations when using this calculator:
Not a stamped design: Planning and takeoff math; get licensed design where the AHJ requires it.
Estimates, not quotes: Cost plans use allowances and your unit price — get 2-3 local quotes.
Frequently Asked Questions
Answers to common questions about this calculator.
What does the Pool Evaporation Calculator do?
The Pool Evaporation Calculator covers: pool evaporation gallons from surface area and daily loss — with refill cost. Enter your values above and every result, step, chart and plan updates live.
What is the formula behind the Pool Evaporation Calculator?
The core formula is gallons = area x inches x 0.623. The alternate form shown on the page is monthly = daily x 30.44. All math runs at full precision; only the display is rounded.
What inputs does the Pool Evaporation Calculator need?
Enter Surface area (sq ft, default 512) and Evap loss (in/day, default 0.25). Live steps show each substitution.
What units does the Pool Evaporation Calculator report?
The headline result is reported in gal (evap per day), with cubic feet in cu ft and thousands in kgal beside it. Keep one consistent input unit per field.
How accurate is the Pool Evaporation Calculator?
Arithmetic follows directly from your inputs using gallons = area x inches x 0.623, so accuracy equals measurement quality. Verify one line by hand (see the verification FAQ), confirm nameplate values, and check against the governing code table before buying.
Can you walk through an example with the Pool Evaporation Calculator?
With the defaults (surface area 512 sq ft, evap loss 0.25 in/day), the calculator substitutes each value into gallons = area x inches x 0.623 in the Steps section and lands on the dashboard headline. Change any input to replay the path with your numbers.
Which code or standard governs the Pool Evaporation Calculator?
the ANSI/APSP/ICC pool code, NEC Article 680 and local barrier ordinances govern the work; the calculator implements the standard math, and your local amendment has the final word.
How does the Pool Evaporation Calculator price the job?
Enter any unit price and the dashboard, cost plan and pie chart split materials, labor allowances and a 10% contingency instantly. Leave price blank for an engineering-only answer.
What is the most common mistake with the Pool Evaporation Calculator?
Mixing units (inches vs feet, kW vs BTU/h, yards vs bags) and skipping waste, coverage and rounding allowances. The Steps section exposes every conversion so a slipped unit is visible immediately.
When should I hire a pro instead of trusting the Pool Evaporation Calculator?
Use the calculator for planning, takeoffs and quote checks; hire a licensed pool contractor for permitted work, structural/roof changes, fuel and power connections, and anything the inspector must see. Bring the printed steps — pros quote faster with documented numbers.
How many gallons does the Pool Evaporation Calculator say my pool hold?
A: rectangles are length x width x average depth x 7.48; ovals and rounds use 0.785 of the rectangle; kidneys about 0.9. A 16x32 pool averaging 5 ft holds ~19,200 gallons — the Pool Evaporation Calculator shows gallons, liters and cubic feet together.
How do I measure average depth for the Pool Evaporation Calculator?
A: (shallow + deep)/2 for straight slopes, or sound 4-6 spots and average them for hoppers and diving wells. Every foot of misread depth on a 500-sq-ft pool swings ~3,700 gallons — measure, do not guess.
How long to fill or drain per the Pool Evaporation Calculator?
A: hours = gallons/(GPM x 60) — 20,000 gallons at 10 GPM fills in ~33 hours. Draining follows the same math at the pump or siphon rate; never drain a vinyl or fiberglass shell fully without pro guidance (pop-out risk).
What pump size does the Pool Evaporation Calculator recommend?
A: the pump must turn the pool over in 6-8 hours: GPM = gallons/(hours x 60), then match total dynamic head. A 20,000-gallon pool needs ~42-56 GPM — typically 1 to 1.5 HP residential. Variable-speed pumps cut energy ~50-70%.
What filter size goes with the Pool Evaporation Calculator?
A: filter area = system GPM/sand-rate (20 GPM/sq ft sand, ~10 DE, ~0.5-1 cartridge per GPM by model). Undersized filters short-cycle and channel — the Pool Evaporation Calculator pairs area to your pump GPM, not your pool gallons.
What heater size per the Pool Evaporation Calculator?
A: BTU/h = gallons x 8.33 x desired-rise/(hours x efficiency). Raising 20,000 gallons 20 F in 24 hours wants ~175,000 BTU/h input — the Pool Evaporation Calculator sizes gas heaters, heat pumps (derate in cold air) and solar from the same inputs.
How much will heating cost in the Pool Evaporation Calculator?
A: gas cost = BTU/h x hours/100,000 x $/therm/efficiency; electric = kW x hours x $/kWh. A cover typically cuts heat loss 50-70% — the Pool Evaporation Calculator savings page prices open vs covered operation.
How much chlorine or salt per the Pool Evaporation Calculator?
A: dosing is per 10,000 gallons — 1 trichlor tab per 10k per week maintenance, 1 lb shock per 10k to breakpoint, salt systems hold ~3,200 ppm (~270 lb per 10k gallons from fresh). The Pool Evaporation Calculator scales label doses to your gallons.
How do pH, alkalinity and stabilizer dose in the Pool Evaporation Calculator?
A: 80-120 ppm alkalinity buffers pH 7.2-7.8; stabilizer (CYA) targets 30-50 ppm outdoor (never over ~100); muriatic acid lowers pH/alkalinity per the label per 10k gallons. The Pool Evaporation Calculator converts your test readings to ounces and pounds.
How much water evaporates per the Pool Evaporation Calculator?
A: gallons/day = surface sq ft x inches-lost x 0.623 — a 500-sq-ft pool losing 1/4 in/day evaporates ~78 gallons daily (~2,300/month). Covers, windbreaks and lower water temperature cut it; the Pool Evaporation Calculator prices the refill.
How much does a cover save in the Pool Evaporation Calculator?
A: enter open-pool vs covered monthly cost (heat + water + chemicals) and the Pool Evaporation Calculator reports dollars and percent saved plus 10-year cumulative. Solar covers add ~8-15 F of free heat on top of evaporation savings.
How much tile and coping per the Pool Evaporation Calculator?
A: waterline tile = perimeter/(tile length) with 10-15% cutting waste; coping = perimeter/stock length plus corners. A 16x32 pool has a 96-ft perimeter — ~200 six-inch tiles before waste.
How big a liner per the Pool Evaporation Calculator?
A: floor area plus wall area (2 x (L+W) x depth) plus cove and overlap — the Pool Evaporation Calculator sums all three in square feet so the liner quote checks against the sheet size. Measure bead-to-bead, not waterline.
How much deck around the pool in the Pool Evaporation Calculator?
A: 3-4 ft minimum walkway, 6-8 ft for loungers; the Pool Evaporation Calculator areas the deck ring (outer minus pool) and converts to pavers, concrete yards, or stone tons with waste. Slope 1/4 in per ft away from the water.
How do I verify the Pool Evaporation Calculator by hand?
A: gallons = L x W x D x 7.48; fill hours = gallons/(GPM x 60); pump GPM = gallons/(turnover-hours x 60); chlorine = gallons/10,000 x label dose. If hand math differs, check average vs deep-end depth.
What is the biggest mistake the Pool Evaporation Calculator prevents?
A: sizing pumps, filters and heaters from pool length instead of gallons and head — and shocking by feel instead of per-10k math. Both waste money weekly; the Pool Evaporation Calculator keeps every dose and duty on the same gallon figure.
When should I hire a pro per the Pool Evaporation Calculator?
A: hire licensed pros for gas and 240V hookups, structural shell work, main-drain/VGB compliance, liner installs and salt-system commissioning. Use the Pool Evaporation Calculator for volumes, doses, runtimes and quote checks.
What turnover and circulation in the Pool Evaporation Calculator?
A: residential code targets a full turnover every 6-12 hours (6-8 typical); run the pump long enough daily to hit it, more in heat and heavy use. The Pool Evaporation Calculator converts your pump GPM to daily turnover count.
What pipes and flow per the Pool Evaporation Calculator?
A: keep suction velocity under ~6 ft/s (quieter under 4), pressure under ~8; 2-in PVC carries ~50-70 GPM comfortably. The Pool Evaporation Calculator solves pipe diameter from GPM and velocity, then rounds to nominal schedule-40.
How much digging and concrete in the Pool Evaporation Calculator?
A: excavation = (pool + 2-ft overdig each side) x depth/27 in yards; gunite ~6-10 in thick over the shell area; backfill = excavation minus pool volume. The Pool Evaporation Calculator volumes all three so trucks and tickets match.
What chemistry ranges does the Pool Evaporation Calculator assume?
A: free chlorine 1-4 ppm (salt 1-3), pH 7.2-7.8, alkalinity 80-120, calcium 200-400, CYA 30-50 outdoor. Test weekly, dose per the Pool Evaporation Calculator, and never mix chemicals — add separately with circulation running.
What safety and code apply to the Pool Evaporation Calculator pool?
A: 4-ft climb-resistant barriers with self-closing/self-latching gates (code in most jurisdictions), VGB-compliant anti-entrapment drains, GFCI/NEC 680 electrical, and constant supervision — math never substitutes for a fence and an alarm.
Related Calculators
Explore more calculators related to this topic.
Related Guides
Deepen your understanding with these educational resources.
Glossary
Technical terms used in mortgage calculations explained in plain language.
- Evap per day
- Headline result of this calculator, reported in gal.
- Net vs order quantity
- Net is pure math before waste; order adds waste %, coverage and whole-unit rounding.
- Waste factor
- Uplift for cuts, offcuts, defects and rework — typically 10% straight runs, 15% cut-up, 20% complex.
- Turnover rate
- Hours to filter the full pool volume once — 6-8 hours is the residential target.
- GPM / TDH
- Gallons per minute of flow against total dynamic head in feet of water.
- Free chlorine (ppm)
- Active sanitizer parts per million; hold 1-4 ppm (1-3 salt).
- CYA (stabilizer)
- Cyanuric acid shielding chlorine from sun; hold 30-50 ppm outdoors.
- BTU/h heater rating
- Heat output rate; 1 therm = 100,000 BTU of gas input.
Authoritative References
Trusted sources and standards referenced by this calculator.
ANSI/APSP/ICC — Swimming Pool and Spa Codes NFPA 70 — National Electrical Code, Article 680 (Pools) CDC — Healthy Swimming Guidance EPA — WaterSense Outdoor Water Use Home Depot — Pool Care Guides Lowe’s — Pool and Spa Guides
Applicable Standards
Gallons = L x W x avg depth x 7.48; turnover every 6-8 hours residentialFree chlorine 1-4 ppm, pH 7.2-7.8, alkalinity 80-120, CYA 30-50 outdoorNEC 680 + 4-ft climb-resistant barriers with self-latching gatesDoses scale per 10,000 gallons; never mix chemicals — circulate between addsMoney rounded for display only; all calculations run at full precision
Was This Calculator Helpful?
Page Information
Last Updated:
2026-09-24
Version:
2.0.0
References:
License:
Free to use for educational and professional purposes.