2026-09-24 8 min read
Solar Irradiance Calculator
Peak sun hours from plane-of-array irradiance — the resource number every other page needs.
Calculator
Quick presets
Daily irradiance(kWh/m2/day) Help
kWh/m2/day
POA resource
Diagram
Sketch for solar irradiance calculator with your values. Not to scale — verify on site before ordering.Plan
| Item | Value |
|---|---|
| Peak sun hoursHeadline peak sun hours | 5.00 hrs/day |
| Annual sunSupporting figure | 1,825.00 hrs/yr |
| kWh per kW-daySupporting figure | 4.00 kWh |
| Priced value (enter a unit price)Materials before labor + contingency | — |
Cost plan
| Materials | $25.00 |
| Labor and install | $12.50 |
| Contingency | $3.75 |
| Project total | $41.25 |
Estimates only — get 2–3 local quotes. Labor varies by region.
Comparisons
| Annual sun | 1,825.00 |
| kWh/kW-day | 4.00 |
| kW per 1000kWh/mo | 8.33 |
Results
Normal
Peak sun hours
5.00hrs/day
From PSH = daily plane-of-array kWh/m²
Annual sun
1,825.00hrs/yr
Supporting conversion
kWh per kW-day
4.00kWh
Supporting conversion
Live results update as you type — currently showing 5.00 hrs/day for solar irradiance calculator. Replace the defaults with your own values for an exact takeoff.
Visualizations
Your site vs climates (sun hrs)
5Your result
3Cloudy (3)
6Sunny (6)
Result vs 10% allowance
Result91%
Allowance (10%)9%
Formula
Peak sun hours from plane-of-array irradiance — the resource number every other page needs.
PSH = daily plane-of-array kWh/m²
Alternative Form
annual sun = PSH x 365
Variables
| Symbol | Name | Unit | Description |
|---|---|---|---|
| V1 | Daily irradiance | kWh/m2/day | POA resource |
| Q | Result | hrs/day | Headline answer at full precision. |
Explanation
Inputs convert to consistent units first, the formula runs at full precision, then waste and rounding produce the order figure. Cost multiplies by your unit price.
Step-by-Step Calculation
Follow each step to understand how the result is calculated from your inputs.
Step 1
Peak sun hours numerically equal daily plane-of-array kWh/m2.
PSH = 5
Result: 5.00 sun hours/day
Step 2
Annual sun plus yield per installed kW.
ann = PSH x 365
Result: 1,825 hrs/yr; 4.00 kWh/kW-day
Final Answer
5.00
Worked Examples
See how the calculator works with different scenarios.
Scenario
The live inputs above run through the full path below — not just the headline answer.
Inputs
Daily irradiance:5 kWh/m2/day
Calculation
1. Peak sun hours numerically equal daily plane-of-array kWh/m2. → 5.00 sun hours/day 2. Annual sun plus yield per installed kW. → 1,825 hrs/yr; 4.00 kWh/kW-day
Result
5.00 hrs/day
Interpretation
Order the uplifted figure, never the net: cuts, defects, rounding and code minimums consume the allowance.
Understanding Your Result
Your Result: Peak sun hours: 5.00 hrs/day
Typical range: Seattle ~3.5 · Midwest ~4.5-5 · Southwest ~6-6.5.
What This Means
Your result is 5.00 hrs/day (peak sun hours). That is the engineered figure — verify it against the code table before buying.
Why It Matters
Sizing drives budget, schedule, deliveries and inspections. Small input errors compound across runs, so modelling before buying is the cheapest due diligence.
Professional Interpretation
Plan around 1,825.00 hrs/yr (annual sun). Keep same-lot spares for repairs.
How this is calculated
PSH = daily plane-of-array kWh/m². Peak sun hours from plane-of-array irradiance — the resource number every other page needs.
What drives the result
Input size, the selected option, waste % and whole-unit rounding. Unit price never changes quantity — only cost.
Recommendations
- •Split irregular scopes into measurable runs and add the sections.
- •Add waste before ordering: x1.10 straight, x1.15 cut-up, x1.20 complex.
- •Measure twice — lasers beat tapes past 20 ft; photograph nameplates.
- •Keep spares: lots, dye and grain shift between batches.
Educational Content
Introduction
Peak sun hours from plane-of-array irradiance — the resource number every other page needs.
Concept Explanation
Every calculation reduces to PSH = daily plane-of-array kWh/m², evaluated at full precision after unit conversion. The Steps section shows each substitution so the path is auditable.
Applications
▸Planning and takeoffs
▸Bid backup and quote checks
▸Permit documentation
▸Delivery and crew scheduling
▸Verification against supplier quotes
Benefits
- •One live calculation — no separate tools per size or material
- •Steps show every substitution for bid backup
- •Waste and rounding separated from net math
- •Instant cost, charts and lists from the same numbers
Limitations
- •Planning math only — it does not replace stamped design where required
- •Allowances use national planning rates; confirm local stock and prices
- •Irregular geometry should be split into measurable sections
Best Practices
- •Confirm nameplate and table values before ordering
- •Keep one unit per field; watch the steps for conversions
- •Photograph measurements and labels for dispute-proof records
- •Add the trade waste factor before ordering, not after
Common Misconceptions
Myth: Order exactly the computed figure.
Truth: Cuts, defects, fittings and rounding consume 10-20%. Ordering net guarantees a second trip.
Myth: Sticker price picks the cheapest option.
Truth: True cost is installed cost per net unit after waste, labor and contingency — compare that line.
Myth: One rule fits every job.
Truth: Straight runs, retrofits and complex layouts need different allowances — use the sensitivity example.
Practical Tips
- •Run one calculation per run, room or phase, then add the order lines.
- •Pick stock sizes that divide your runs evenly to cut waste several points.
- •Photograph each measurement next to the tape for bid backup.
- •Enter your actual unit price to turn the takeoff into a budget in one step.
Common Mistakes
Ordering the net figure with no waste.
Use the order line: net x (1 + waste%) rounded up to whole units.
Mixing units in one run.
Keep one unit per field; the steps show every conversion explicitly.
Forgetting fittings, slack and extras.
Add equivalents and slack first, then apply waste — in that order.
Ignoring lot/batch differences on the second trip.
Order spares from the same lot up front.
Skipping the verification step.
Recompute one line by hand using the FAQ method before paying.
Assumptions
This calculator makes the following assumptions to provide estimates:
Consistent units: Each field uses its stated unit; conversions run before the formula.
Standard conditions: Water at ~60 F; copper electrical at 75 C terminations unless noted.
Code minimums: Results at or above model-code minimums; local amendments may require more.
Limitations
Be aware of these limitations when using this calculator:
Not a stamped design: Planning and takeoff math; get licensed design where the AHJ requires it.
Estimates, not quotes: Cost plans use allowances and your unit price — get 2-3 local quotes.
Frequently Asked Questions
Answers to common questions about this calculator.
What does the Solar Irradiance Calculator do?
The Solar Irradiance Calculator peak sun hours from plane-of-array irradiance — the resource number every other page needs. Enter your values above and every result, step, chart and plan updates live.
What is the formula behind the Solar Irradiance Calculator?
The core formula is PSH = daily plane-of-array kWh/m². The alternate form shown on the page is annual sun = PSH x 365. All math runs at full precision; only the display is rounded.
What inputs does the Solar Irradiance Calculator need?
Enter Daily irradiance (kWh/m2/day, default 5). Live steps show each substitution.
What units does the Solar Irradiance Calculator report?
The headline result is reported in hrs/day (peak sun hours), with annual sun in hrs/yr and kwh per kw-day in kWh beside it. Keep one consistent input unit per field.
How accurate is the Solar Irradiance Calculator?
Arithmetic follows directly from your inputs using PSH = daily plane-of-array kWh/m², so accuracy equals measurement quality. Verify one line by hand (see the verification FAQ), confirm nameplate values, and check against the governing code table before buying.
Can you walk through an example with the Solar Irradiance Calculator?
With the defaults (daily irradiance 5 kWh/m2/day), the calculator substitutes each value into PSH = daily plane-of-array kWh/m² in the Steps section and lands on the dashboard headline. Change any input to replay the path with your numbers.
Which code or standard governs the Solar Irradiance Calculator?
NEC Article 690, IRC fire-access setbacks and utility interconnect rules govern the work; the calculator implements the standard math, and your local amendment has the final word.
How does the Solar Irradiance Calculator price the job?
Enter any unit price and the dashboard, cost plan and pie chart split materials, labor allowances and a 10% contingency instantly. Leave price blank for an engineering-only answer.
What is the most common mistake with the Solar Irradiance Calculator?
Mixing units (inches vs feet, kW vs BTU/h, yards vs bags) and skipping waste, coverage and rounding allowances. The Steps section exposes every conversion so a slipped unit is visible immediately.
When should I hire a pro instead of trusting the Solar Irradiance Calculator?
Use the calculator for planning, takeoffs and quote checks; hire a licensed licensed solar installer/electrician for permitted work, structural/roof changes, fuel and power connections, and anything the inspector must see. Bring the printed steps — pros quote faster with documented numbers.
How do I stay safe using the Solar Irradiance Calculator?
A: rooftop work needs fall protection and a structural check; DC strings run 600-1,000V with real arc-fault energy. Only licensed electricians make the interconnect — the Solar Irradiance Calculator plans conduit, wire and disconnect placement.
How many sun hours does the Solar Irradiance Calculator assume?
A: peak sun hours equal local kWh per square meter per day — roughly 3 to 6 across the US. Look yours up (NREL PVWatts) and enter it; every 0.5 sun-hour moves system size ~10%.
How does shading change the Solar Irradiance Calculator?
A: even 10% shade can cut string output 10-30%. Microinverters or optimizers isolate shaded panels; survey with a shade tool and derate the Solar Irradiance Calculator production for the shaded array.
How do tilt and azimuth move the Solar Irradiance Calculator?
A: tilt near your latitude facing true south (180°) is the annual optimum in the northern hemisphere; east/west arrays lose ~10-20% but match time-of-use peaks. The Solar Irradiance Calculator tilt/azimuth specs quantify both.
How many panels fit my roof per the Solar Irradiance Calculator?
A: each panel needs ~18 sq ft plus IRC fire-access setbacks (typically 3-ft ridge and eave paths). The Solar Irradiance Calculator converts array kW to panel count to roof area so the layout check is one step.
What size inverter goes with the Solar Irradiance Calculator?
A: size AC watts near 80-100% of DC array watts (DC/AC ratio 1.1-1.3 is standard). The Solar Irradiance Calculator rounds to the next standard inverter and flags clipping on oversized arrays.
Do I need batteries with the Solar Irradiance Calculator system?
A: with 1:1 net metering, usually not; for backup, time-of-use arbitrage or off-grid, yes — sized to critical loads and autonomy days. The Solar Irradiance Calculator battery specs run that sizing separately.
How do I size batteries from the Solar Irradiance Calculator?
A: usable kWh = amp-hours x volts x depth-of-discharge / 1,000. Keep lithium (LiFePO4) near 80-90% DoD and lead-acid at 50%; the Solar Irradiance Calculator applies your chemistry automatically.
How does net metering affect the Solar Irradiance Calculator payback?
A: full 1:1 credit is the fastest payback; low export rates or time-of-use tariffs stretch it. The Solar Irradiance Calculator prices pre-incentive energy value — enter your actual buy/sell rates for the true line.
How does the Solar Irradiance Calculator handle panel degradation?
A: panels lose ~0.5% per year; 25-year warranties guarantee ~80-87% of nameplate. The Solar Irradiance Calculator compounds degradation so lifetime savings never assume day-one output forever.
What maintenance does the Solar Irradiance Calculator assume?
A: rinse panels once or twice a year, expect inverter replacement around year 10-15, and monitor per-panel output. Soiling alone costs 2-5% where dust and pollen rule.
How do I verify the Solar Irradiance Calculator by hand?
A: system kW = monthly kWh / (30 x sun hours x 0.8); annual kWh = kW x sun hours x 365 x 0.8. If hand math differs, check DC vs AC watts and the derate factor.
What is the biggest mistake the Solar Irradiance Calculator prevents?
A: sizing to summer bills only and treating nameplate watts as delivered AC power. Real AC yield is DC x sun x ~0.8 derate — the number the Solar Irradiance Calculator reports.
When should I hire a pro per the Solar Irradiance Calculator?
A: hire out structural/roof review, permitting and utility interconnect, main-panel upgrades, and battery commissioning. Use the Solar Irradiance Calculator for sizing, takeoffs and quote checks.
How does the Solar Irradiance Calculator treat off-grid vs grid-tied?
A: off-grid sizes to 2-3 sunless autonomy days plus a generator; grid-tied targets annual net-zero against the meter. Different batteries, different math — pick the right Solar Irradiance Calculator page.
What wire size does the Solar Irradiance Calculator recommend for solar?
A: hold DC homerun drop to 2-3% and upsize long roof-to-inverter runs a gauge. The Solar Irradiance Calculator voltage-drop specs flag anything past ~3% before you buy copper.
How does temperature derate the Solar Irradiance Calculator?
A: cells lose ~0.3-0.4% per degree C above 25 C cell temperature, so hot roofs underperform nameplate at noon. The Solar Irradiance Calculator derate factor absorbs this plus soiling and mismatch.
What incentives stack on the Solar Irradiance Calculator cost?
A: the federal investment tax credit plus state/utility rebates, SRECs and (commercial) MACRS. The Solar Irradiance Calculator reports pre-incentive cost — subtract your stack for the net line.
How does roof age interact with the Solar Irradiance Calculator?
A: with under ~10 years of roof life left, reroof first — mounts, flashing and labor warranties all reset with the roof. The Solar Irradiance Calculator material estimate assumes sound mounting surface.
How do EVs change the Solar Irradiance Calculator size?
A: each EV adds roughly 2,500-4,000 kWh per year (~8-12 extra panels). Add the charger load before sizing so the array covers driving, not just the house.
What monitoring proves the Solar Irradiance Calculator output?
A: revenue-grade metering or per-panel app data against the Solar Irradiance Calculator prediction, trued up yearly. Persistent 10%+ shortfalls mean shade, soiling or a failed optimizer — not a math error.
How do I document the Solar Irradiance Calculator for permit and utility?
A: one-line electrical diagram, equipment spec sheets, site/plot plan and NEC 690 placards. The Solar Irradiance Calculator steps attach as the sizing backup utilities ask for.
Related Calculators
Explore more calculators related to this topic.
Related Guides
Deepen your understanding with these educational resources.
Glossary
Technical terms used in mortgage calculations explained in plain language.
- Peak sun hours
- Headline result of this calculator, reported in hrs/day.
- Net vs order quantity
- Net is pure math before waste; order adds waste %, coverage and whole-unit rounding.
- Waste factor
- Uplift for cuts, offcuts, defects and rework — typically 10% straight runs, 15% cut-up, 20% complex.
- Peak sun hours
- Daily kWh/m² of solar resource — numerically the hours at 1,000 W/m².
- Derate factor
- Combined losses (temperature, soiling, wiring, inverter) — ~0.75-0.85 typical.
- DC/AC ratio
- Array DC watts over inverter AC watts; 1.1-1.3 is standard.
- Depth of discharge (DoD)
- Usable share of battery capacity; chemistry-dependent.
- Net metering
- Utility credit for exported kWh against imported kWh.
Authoritative References
Trusted sources and standards referenced by this calculator.
NFPA 70 — National Electrical Code, Article 690 (Solar PV) NREL — PVWatts Solar Resource Calculator U.S. DOE — Energy Saver: Planning a Home Solar System Energy Star — Home Energy Guidance DSIRE — Incentives Database Solar Energy Industries Association (SEIA)
Applicable Standards
NEC 690 governs PV wiring, disconnects, rapid shutdown and labelingAnnual kWh = kW x sun hours x 365 x derate (~0.8 planning)Hold DC homerun voltage drop to 2-3%; utility interconnect rules applyPanels degrade ~0.5%/yr; 25-yr warranty output ~80-87% of nameplateMoney rounded for display only; all calculations run at full precision
Was This Calculator Helpful?
Page Information
Last Updated:
2026-09-24
Version:
2.0.0
References:
License:
Free to use for educational and professional purposes.